A fun set of two water bottle holders to keep your water close and cool through hot summer days whilst we get our daily exercise.

You can make these holders with or without the silver cooler foil. All panels do have a fabric lining as well. The total height of the holder is approximately 7.5 inches (19 cm), and the diameter is approximately 11.5 inches (29 cm). A wide variety of bottle sizes will fit in this holder and you may also have some room to fit in some energy bars for along the way!

The main panels of the holder is done on the embroidery machine and assembly happens with your normal sewing machine. The top cuff with the draw string to close the top is also added with your normal sewing machine. You have the option not to add the draw string enclosure if you so wish as the top edge of the panels are finished off with a satin stitch, so no problem. The way the cuff gets attached to the holder allows you to easily folds the cuff into the holder for easy access to your water bottle when required.

The strap of the holder can either be braid, cord or a fabric strap to match your holder and this you can make as long or as short as you wish. If you wish to have an across the body strap, just increase the length of your strap to fit your body. Instructions are included.

Stitch count: 3,439 - 17,173