Opening Multiple Design Files

I am new to embird. How do I open multiple designs at the same time? From what I’ve read on other posts, I should be able to do so by holding down the control key between selections. This has not worked for me.

Save Embird Thread Colors

I have had to reinstall Embird quite a few times and each time I had to reinstall all of my thread colors. Do you by any chance know how I can find the file of my thread colors so I can save it and reinstall it when I reinstall Embird?

Thanks, in advance, for any help you can provide.
Gina

Hi Gina – This is what you need to do in order to save and reinstall your marked threads.

When you mark threads in a catalogue, your changes are recorded in a config file in the Embird32/Embird64 folder. This file is nitfy.ini and it stores your marked threads.

If you want to transfer your marked threads to a new version of Embird then you should copy the nitfy.ini file from your Embird32/Embird64 folder onto a removable media such as a USB drive or save it on your hard drive. Then paste this file into the same folder in Embird32/Embird64 folder on your computer after re-installing and you will have the the marked threads back in Embird when you re-open the program.

Always keep a copy of this file in a safe place.

Carolyn Keber
Tutorials for Embird and PE Design

PE Design vs Embird

I have recently purchased a Brother LB-6800PRW and was unaware that I needed a digital converter to convert my photo’s to .pes or .dst which are the two formats that my machine takes. I was told that I need to purchase either PE design plus or PE design next. After looking into these programs, I realized how expensive they are! I have seen and heard several people talking about Embird and how it is very similar if not better than the other two. I am trying to figure out if I can use Embird to convert my formats of my photos and use with my machine? I really look forward to your response!

You can definitely use Embird to convert your photos to PES files. You would need the basic Embird program, along with the plug-in Sfumato Stitch.

You can download the latest version of Embird (and any of the plug-ins) and use the program free of charge in trial version for up to 30 days to test the features prior to purchasing registration.

To download, or for more information, please go to this page of the Secrets website.

Margaret Hardwick-Smith

Customer Support
at Secrets of Embroidery

Can I Digitize my own fonts on PE Design Basic?

Hi Carolyn,
I have a brother embroidery machine and I would like to download different fonts and monogramming fonts to use on my machine. I just purchased PE-Design Basic from Brother but it doesn’t look like I’ll be able to design the fonts or monograms in this program. Can you advise if Embird would allow me to design a monogram or put letters together to make words, like my daughter’s name? Or maybe I need the higher level of PE-Design? I’m at a loss and would greatly appreciate your advice.
Thank you, Laurie

Hi Laurie

PE Design Basic does not have a digitising function at all. It’s really just for minor editing – although I would think that you would be able to purchase lettering that has been digitised already and open and arrange them in PEDS Basic. But if you wished to use True Type Fonts and convert them into ready designs or lettering then you would either have to purchase the full PE Design Next or perhaps PEDS Lite. But to be honest Embird represents much better value for money. The full price of the program is less than PE Design Next or Lite to begin with and then any upgrades are only dollars as opposed to hundreds of dollars for Embird upgrades. I teach both programs – PE Design and Embird – so I have nothing to gain in recommending one over the other but the last upgrade to Embird was $20 whereas I generally pay approx $600 per upgrade for any upgrade to the Brother programs. I’ve had PE Design since Version 2 and have now stopped upgrading at Version 8. I have also had Embird since 1998 and their upgrades have cost me in total over 14 years no more than $80 total (for 14 years).

In Embird Editor you can use the Embird lettering (purchasable at approx $13.50 per lettering style) or you can purchase Font Engine as an add on to Embird at $132.00. Embird itself is $150 and with Font Engine as an add-on or perhaps some of the pre-digitised fonts (which are excellent BTW) you will still be paying far less than the Brother programs plus you’ll have a great amount more of editing capabilities than you’ll ever have with PE Design.

If you wish to make designs from scratch – digitising – then you’ll also need to purchase Embird Studio (Digitising Tools $135.00) This will enable you to create any number of designs, save them and then stitch them on your machine.

But if you’re just looking to create some lettering – such as your daughters name – then my advice would be to get Embird Basic ($132) and some of the Embird lettering at $13.50 each. The lettering is fabulous and resizeable perfectly. And the editing capabilities of Embird are just fantastic. This is really the best value for money program around. Embird will write to any format other than ART

Try the Embird program for 30 days free of charge and see what you think of it . And its a fully functioning version of the program and can be used on any computer you own – without a security device (no dongles).

I think you’re best to start with Embird Basic and a couple f alphabets and get used to them before you buy extra add-ons such as Font Engine or Digitising Tools (Embird Studio) But be assured that Embird will do as you wish to do…

I hope that helps but if you need more info then just email me again.

Kind regards

Carolyn Keber
Step by step lessons for Embird and PE Design

View All Designs in Embird

At one time on Manager you could view all designs and at the bottom of designs was a place that you could tick that told you how many pages there were of designs and you could print them. You had the option of printing either odd pages or even so that you could print both sides of a page. You also had the option of going to any page. Now I can’t find it.

I think that you may have your Process Panel command in Manager turned off.

In Embird Manager go to Options on the Menu Bar and move down to Show Process Panel and left mouse click on it. The Process Panel will then appear and you’ll have the option to Print and you’ll also be able to see how many pages of designs are open etc.

I hope that helps.  Best of luck.

Carolyn Keber
Step by Step Tutorials for all Embird programs and for PE Design